CNC Lathe Trainer - Stepper Description and Specifications for Lab Tenders
CNC Lathe Trainer - Stepper.
CNC Lathe Trainer - Stepper.
CLT 150 is based on stepper motors and stepper drives. This is our
highest selling model in Indian subcontinent. Rigid design and PLC based
technology gives this machine a technological advantage over its
competitor.
Complete independence from computer (No I/O card used) prevents this machine from any issues related with electrical supply (Noise and Spikes). Down time of PLC based machines is 90% less as compared to other computer (I/O Card) based machines.
Also, machines to be operated remotely. Hence problem detection and eventual solution can be attained within minutes.- Specifications:
| Bed Type | Flat / 45 Degrees Slant |
| Keyboard Type | Fanuc Emulated / Manual |
| Chuck Size | 150 mm (Dia) |
| Chuck Type | Hydraulic |
| Maximum Turning Diameter | 80 mm |
| Maximum Turning Length | 250 mm |
| Center Height | 150 mm |
| Swing over Cross Slide | 125 mm |
| Swing Over Bed | 300 mm |
| Distance between Centre | 320 mm |
| Controller | CutViewer-United Kingdom |
| Control System | PLC Based Control System |
| Operating Software | CutViewer - United Kingdom |
| Positioning | 0.010 mm |
| Repeatability | +- 0.015 mm |
| Resolution | 0.010 mm |
| Spindle Motor | AC Servo |
| Spindle Motor Capacity | 3.7 KW / 5 HP |
| Spindle RPM | 100 to 4000 RPM with VFD |
| Spindle Nose Taper | A 2-3 / MT 3 / A 2-5 |
| Hole Through Spindle | 20 mm |
| Axis Motor and Drive | Stepper Motor with Stepper Drives imported from Singapore |
| X Axis Travel | 100 mm |
| Z Axis Travel | 300 mm |
| Ball Screw X / Z | Ø25 x 5 - C3 Class |
| Feed Rate | 0 to 1,200 mm/min |
| Rapid Travel | 1,200 mm/min |
| Turret Type | Automatic |
| Number of Stations | 4 / 8 |
| Tailstock Base Stroke | 170 mm |
| Tailstock Actuation | Hydraulic/ Manual |
| Lubrication | Automatic |
| Coolant | Automatic |
| FMS Compatibility | Provided |
| Dimension in mm | 1520 x 800 x 1200 mm |
| Power Supply | 230V, Single Phase |