CNC Mill Trainer Description and Specifications for Lab Tenders
CNC Mill Trainer.
CNC Mill Trainer.
This is our highest selling model (Among CNC Milling Trainer
Machines) in Indian subcontinent. Rigid design and PLC based technology
gives this machine a technological advantage over its competitors.
Complete independence from computer (No I/O card used) prevents this machine from any issues related with electrical supply (Noise and Spikes). Down time of PLC based machines is 90% less as compared to other computer (I/O Card) based machines.
Also, machines to be
operated remotely. Hence problem detection and eventual solution can be
attained within minutes.
Specifications:
| Axis Motor and Drive | Stepper Motor with Stepper Drives |
| X Axis | 225 mm |
| Y Axis | 150mm |
| Z Axis | 150 mm |
| 4th Axis Provision (Optional) | Not Provided |
| Table top to Spindle Nose distance | 70 - 290 mm |
| Spindle to column distance | 270 mm |
| Feed Rate | 0 to 1,000 mm/min |
| Rapid Travel | 1,000 mm/min |
| Table Size | 560 x 220 mm |
| T Slot | 3 x 10 x 50 |
| Load on Table | 120 Kg |
| Spindle Motor Capacity | 1.5 HP |
| Spindle Nose Taper | ISO 30 / BT 30 |
| Spindle RPM | 100 to 3000 RPM |
| Controller | CutViewer-United Kingdom |
| Control System | PLC Based Control System |
| Operating Software | CutViewer - United Kingdom |
| Positioning | 0.010 mm |
| Repeatability | +- 0.015 mm |
| Resolution | 0.010 mm |
| 4th Axis Resolution (Optional) | Not Provided |
| Tool Changer | Automatic / Manual Quick Tool Change |
| No. of Tools | 8 |
| Maximum Tool Length | 40 mm |
| Maximum Tool Dia. | 16 mm |
| Actuation | Hydraulic (Compressor not required) |
| Interpolation | Linear / Circular / Parabolic |
| Pocket & Helical Milling | Provided with standard codes |
| Dimension in mm | 1150 x 1000 x 1750 mm |