Fluidisation And Fluid Bed Heat Transfer Unit Description and Specifications for Lab Tenders
Fluidisation And Fluid Bed Heat Transfer Unit.
Fluidisation And Fluid Bed Heat Transfer Unit FLUIDISATION AND FLUID BED HEAT TRANSFER UNIT
DESCRIPTION:
This
is a dryer in which moisture removal takes place by fluidization of
solids particles by hot air. The set-up fitted with a specially
designed, vertical Glass Column. The lower portion of the column is
filled with fluidizing material. The material is supported on the screen
mesh held between two flanges. Air from a compressor is heated in the
heater box and passed through the column. Flow control and by-pass valve
are fitted to regulate the airflow. At the top outlet of column a
cyclone is provided to collect any solid particles taken out by the air
stream.
EXPERIMENTATION: To study the fluidized bed drying. To plot the drying curve under fluidized bed condition.
UTILITIES REQUIRED :Electricity Supply : 1 Phase, 220 V AC, 3 kW.Granular and free flowing solid of size 1 to 2 mm.
TECHNICAL DETAILS :
Column
: Material Borosilicate Glass Dia. 80 mm. Total Length 500mm.Cyclone
Separator : Material Stainless Steel, Compatible Capacity with
collector. Air Circulation : By forced draft fan, Arrangement is done
vary the air flow rate. Heating Chamber : Compatible capacity Heater :
Nichrome wire heater Temperature Sensors : RTD PT-100 type.Control panel
comprises of :Digital Temp. Controller : 0 199.9°C (For Hot Air)
Standard make on/off switch, Mains Indicator etc. Instruction Manual :
An ENGLISH instruction manual will be provided alongwith the Apparatus
The whole set-up is well designed and arranged in a good quality painted
structure
Chemical Engineering Laboratory lab equipment manufacturers,exporters and Chemical Engineering Laboratory Lab suppliers