Magnetic Separator Description and Specifications for Lab Tenders
Materials, that have different magnetic
attractability, may be separated by passing them through a magnetic
field. Most often, magnetic separation techniques are used to remove
iron, steel or magnetic iron oxide from materials low in magnetic
attractability. These devices operate in either a continuous or a cyclic
manner. Continuous devices usually have a belt which moves over the
lifting magnetic poles to carry the magnetize partials into a region of
low or zero magnetic field, where they are released. The present set-up
is of In-line lifting magnet type.
The set-up consists of two belts moving
separately in opposite direction at slow speed. Feed through a vibrating
hopper is conveyed over first belt and allowed to pass near the second
belt, which is under magnetic field. The magnetic field is generated by
permanent magnet kept in a box. Magnetically inert material drops off
the belt in a normal manner. Magnetic material is held on the belt,
however, and finally drops off the belt as it leaves the magnetic field.
Both the belts are fitted on the pullies and drived by an electric
motor coupled with a reduction
To study the Principles and operation of a Magnetic Separator.
To determine the efficiency of Magnetic Separator.
Utilities Required :
Raw Material for Feed.
Electric Supply : Single phase, 220 V AC, 1 kW.
Floor Area 1.5 m x 1 m.
Technical Details :
: Width 150mm, Length 500mm
: Material Stainless Steel, Suitable capacity (Continuously Vibrating)
: FHP motor with Reduction Gear Box.
: Permanent Magnets kept in a Stainless Steel chamber.
: 2 Nos. One each for Magnetic and Non-Magnetic material.
Control panel Comprises of:
Standard make On/Off switch, Mains Indicator etc.
: An ENGLISH instruction manual will be provided along with the Apparatus
The set-up is fitted with required guards and product collection tray.
The whole set-up is well designed and arranged in a good quality painted structure
Mechanical Testing Lab equipment manufacturers,exporters and Mechanical Testing Lab suppliers