Pipe Surge and Water Hammer Apparatus Description and Specifications for Lab Tenders
Pipe Surge and Water Hammer Apparatus.
Pipe Surge & Water Hammer Apparatus
The apparatus is designed to generate and visualise water hammers in
pipes and to demonstrate how a surge chamber works. The trainer contains
a pipe section with a surge pipe, solenoid valve & ball valve.In
the first experiment a pipe surge is produced by rapidly closing the
solenoid valve. The sudden deceleration of the water mass releases
kinetic energy, which is converted into potential energy in the surge
pipe. The resulting pressure oscillations are measured by a pressure
sensor in the pipe.The oscillations are plotted on a strip chart
recorder. The oscillation can also be seen as pendulum movement of the
water level in the surge chamber.In the second experiment the valve at
base of surge pipe is closed so that the rapid closing of the solenoid
valve in the pipe section produces a strong water hammer. The water's
kinetic energy is converted into pressure energy. The water hammer and
the subsequent oscillations are detected by the pressure sensor in the
pipe section and plotted on the strip chart recorder.
EXPERIMENTAL CAPABILITIES:
To demonstrate water surge in pipe & study effect of water level on surge magnitude.
To demonstrate water hammer in pipe.
TECHNICAL SPECIFICATIONS:
•
Water reservoir: 250 mm x 250 mm x 1000 mm (H) • Sump Tank: 100 Ltrs,
PVC Tank• Pump: Centrifugal Pump, 230 VAC , Flow 30 LPM, Max. Head 20
m.• Surge Pipe: Acrylic Pipe, 1’’ Diameter, 1 m• Pressure Sensor for
Surge Pressure Measurement
• Solenoid Valve: Electrically Actuated Solenoid Valve • Strip Chart Recorder