Sorting station Description and Specifications for Lab Tenders
Sorting station.
(llustration includes additional equipment and accessories which are not part the main product)
The Sorting station sorts workpieces onto three slides. Workpieces placed on the start of the conveyor are detected by a diffuse sensor. Sensors upstream of the stopper detect the workpiece features (black, red, metal). Sorting gates actuated by short-stroke cylinders via a deflector allow sorting of workpieces onto the appropriate slides. A retro-reflective sensor monitors the level of the slides.
• Operating pressure 600 kPa (6 bar)
• Power supply 24 V DC
• 8 digital inputs
• 4 digital outputs
• Conveyor module, 350 mm in length with 40 mm belt, three slides, retro-reflective sensor comprising optical sensor and reflector, DC motor as conveyor drive with starting current limiter, inductive and optical sensor for sensing colour and material, optical diffuse sensor via fibre optic cable
• 2x sorting gate, pneumatic, mounted on the conveyor, with one double-acting short-stroke cylinder, two sensors for end-position sensing
• Stopper module, mounted on a guide rail, with one single-acting short-stroke cylinder for stopping workpieces
• Valve terminal module for actuation of the pneumatic actuators with 10 mm inserts, comprising 3x 5/2-way valve terminal with pilot control
• One-piece aluminium profile plate (350 x 700 mm) with 50 mm slot width, slots on both sides
• Fibre optic retro-reflective sensor / transmitter and receiver via fibre optic cable
• Service unit with filter and pressure regulator
• Infrared transmitter for sending a release message to a previous station equipped with an infrared receiver
• Terminal block with eight outputs, eight inputs and connection for 24 V DC. Amalgamates all digital signals and forwards these for connection to a controller via an IEEE 488/24-pin compatible plug connection. The signal states are shown via LED displays for ease of troubleshooting
• Manual and CD-ROM
• The station can be operated individually or combined with at least four further stations by simply pushing them together.
All equipment is mounted on an Aluminium Plate
• Height: 32 mm
• Grid spacing (from slot to slot): 50 mm
• Width: 350 mm
• Length: 700 mm