Tape Abrasion Tester For Testing Lab Description and Specifications for Lab Tenders
Tape Abrasion Tester For Testing Lab Workshop.
Tape Abrasion Tester - For Testing Lab
The Abrasion Resistance of cables is determined either by Scrape
Abrasion or Tape Abrasion. In case of Tape Abrasion Test, the abrasive
tape is drawn under the cable. The tape is supported over a pin and
inclined at a specified inclination on both the sides. The test specimen
is mounted over the abrasive tape with load acting on it through a
saddle.
The Tape Abrasion Tester
for automobile cables consists of a moving abrasion tape which abrades
the test sample mounted above it with normal load acting on the
specimen.
The abrading tape is made from 150 grit
abrasive tape with 10 mm wide conductive strips painted perpendicular to
its edge, spaced at a distance of every 75 mm. The tape is moved at the
specified speed with the help of a motorized arrangement. The length of
movement of tape is measured on a digital indicator.
civil lab equipments manufacturers