Training Equipment in Industrial Hydraulics Description and Specifications for Lab Tenders
Training Equipment in Industrial Hydraulics.
The set up comprises a Mobile Lab. Trolley, set of Hydraulics Components and a Comprehensive Manual. Mobile lab. trolley [1] Approx. dim: 1410mm(L) x 750mm(W) x 1520(H). [2] The trolley must have two (2) lockable equipment storage cabinets, each consists of five (5) drawers (depths are 1 x 66mm, 2 x 85mm, 1 x 130mm, 1 x 200mm ‐ approx. sizes). Cabinets and all drawers are to be steel, powder coated construction including drawer fronts. [3] The trolley must have two (2) circuit building plugboards (approx. size) 1100mm x 700mm, each with mounting holes must be fitted with rubber component retaining grommets, but also fitted with receptacle for 1/4 turn aircraft fasteners to lock hydraulic components onto plugboard (for safety). [4] The boards must be powder coated 16swg steel (at least). [5] Two (2) hydraulic power packs must be included, each being totally independent and can be used without interfering with the opposite side of the trolley. [6] Each power pack must have its own electric motor, pressure relief valve, return line filter, electrical start/stop control, oil level sight gauge, filler/breather, drain port, reservoir capacity 10 litres usable (each), flow 3,5 litres per min @ 65 bar. Electric motor must be overload protected with automatic trip (resetable). [7] Pressure and Tank manifolds must be plugboard mounted, with test points for use with pressure gauges.
[8] The trolley is mounted on four (4) heavy duty, rubber tyred castors two (2) of which are swivel and lockable. [9] All hydraulic components and hoses must be fitted with genuine leakage free, 'flat‐face', quick‐connect, self‐seal couplings (male on valves, female on hoses). [10] Except for in‐line components all components must be fitted on plug‐in baseplate with 1/4 turn locking fastener. [11] All components must be genuine industrial components, used in/by industry. [12] Directional control valves must be mini 3 with 3mm nominal bore, rated at 315 bar with 12 litres per min flow. [13] Pressure control valves are series '0' with manual (knob) adjustment Set of Components ‐ Hydraulics, comprises (all components must be identified by ISO1219‐1 symbols):‐ [14] 1 x Pressure Relief Valve [15] 3 x Pressure Gauge with Test Point Adaptor ‐ 50mm diameter stainless steel casing. [16] 1 x Flowmeter, 0 ‐ 8 L/min (0,2 ‐ 2,0 US gal/min) [17] 1 x Double Acting Cylinder 25mm bore x 200mm stroke (horizontal fitment) ‐ with striker cam, must have 2 connections and mini‐mess test point on each port [18] 1 x 4/2 way Lever / Detent Valve [19] 1 x 4/3 way Lever / Detent Valve (Recirculating mid position) [20] 1 x Shut‐off Valve with Graduated Scale [21] 2 x One‐way Flow Control (Throttle/Check) Valves [22] 1 x 3‐way Pressure Reducing Valve [23] 1 x Pilot Operated (Ventable) 2‐stage, Pressure Relief valve [24] 1 x Bi‐directional Motor ‐ with 60mm diameter aluminium faceplate [25] 3 x Cross Tee with Test Point [26] 1 x Set of Hydraulic Hoses with Quick‐connect couplings ‐ (six (6) @ 650mm, four (4) @ 800mm, four (4) @ 1,000mm, two (2) @ 1,200mm) [27] 1 x Double Acting Cylinder 25mm bore x 200mm stroke (vertical fitment) ‐ with striker cam, must have mini‐mess test point on each port. [28] 1 x 20Kg weight for use with vertical cylinder [29] 1 x 4/3 way Lever / Detent valve, (Closed mid position) [30] 1 x 3/2 way Roller / Spring valve [31] 1 x 2‐way Flow Control Valve, Pressure Compensated [32] 1 x Check Valve [33] 1 x Pilot Operated Check Valve
[34] 1 x Pressure Relief / Pressure Sequence Valve [35] 1 x Accumulator Module with safety Circuit (built from separate components to show the system components and function)