Water Hammer Demonstration Unit Description and Specifications for Lab Tenders
Water Hammer Demonstration Unit.
Water Hammer Demonstration Unit
The apparatus is designed to demonstrate
shock waves in water at sonic velocity. Closing the pneumatic valve
causes the pressure to rapidly attain a theoretical value and remain
practically constant as the shock wave travels the length of the pipe,
returning to the transducer as a negative pressure wave.
The time required for the positive pressure wave to travel through the
pipe is used to calculate the speed of sound in water. When the pressure
attains the vapour pressure of the water in the conduit, it causes
Demonstration of the phenomenon of water hammer.
Demonstration of cavitation.
Calculation of the velocity of sound in water.
Investigation of damping phenomena in pipes.
Shock wave propagation.
Studies of the elasticity of the pipe walls.
The Water Hammer Demonstration Unit comprises:
11 m length coil in stainless steel tubing.
1 pneumatic valve.
1 pressure transducer upstream and 1 pressure transducer downstream of the coil.
1 flowmeter with adjustment valve.
1 Bourdon gauge.
1 control cabinet.
1 water tank with drain valve.
1 bypass valve.
1 connection to a vertical tube with a bleed valve to atmospheric pressure for controlling entrapped air volume.
Dimensions and weight
1350 x 650 x 2150 mm
Weight : about 100 Kg
220 V single phase, 50 Hz.
Compressed air supply.
Digital Memory-type oscilloscope.
A compressor can be supplied
Mechanical Testing Lab equipment manufacturers,exporters and Mechanical Testing Lab suppliers