PLC based Hydraulic Trainer Description and Specifications for Lab Tenders
PLC based Hydraulic Trainer.
Product Description:
PLC Based Hydraulic Trainer is designed to demonstrate the operation of various Hydraulic Circuits with help of PLC Controller. The trainer used different electrically operated hydraulic valves & electronic sensors to demonstrate real-life applications of Hydraulic Power.
The trainer consists of a workstation panel for mounting of hydraulic components. The workstation is equipped with a power pack to supply oil under pressure to the components during operation.
The components supplied along with the trainer include Direction Control Valves (Solenoid Operated & Hand Lever Operated), Pressure Control Valves, Flow control valves, Check Valve, Linear Actuators, and Accumulators etc. Each hydraulic component like the valve, cylinder etc is mounted on a mounting plate & has adaptors for making connections using hoses.
The input the PLC comes from proximity switches & the PLC operates the hydraulic valve in programmed sequence.
Experimental Capabilities:
• To study Hydraulic Power pack & its components.
• To study the operation of different Hydraulic Direction Control Valves.
• To study the operation of Hydraulic Check Valve.
• To study the operation of Flow Control Valve.
• To study the operation of Pressure Relief Valve. To study the operation of Linear Actuators.
• To test following Hydraulic circuits
- Regenerative Circuit
- Speed Control of Linear Actuators
- Transverse & Feed Circuit
• To test following PLC based circuits:
- Operation of Solenoid operated direction control valves
- Sequencing Circuit Clamping Circuit
- Counter Circuit
- Feed Back Control of Hydraulic Circuits
- Operation of Electrical Limit Switch
Specifications:
• Hydraulic Power Pack: Gear Pump Electric Motor 1hp, 230 V AC, Oil Sump Tank – 20 Litres Oil Filter, Oil Level Indicator
• Distribution Manifold - 4 Port Manifold, 2 Nos.
• Pressure Relief Valve
• Pressure Gauge
• Direction Control Valves
- 4/2 Way Valve, Spring Return, Normally Closed
- 4/3 Way Valve, Spring Return, Normally Open
- 4/3 Way Valve, Manual Return, Normally Open
• Sequence Valve
• Pressure Sequence Valve
• Non-Return Valve
• Flow Control Valve
• Hydraulic Cylinder - Double Acting Cylinder, 40 mm Bore x 100 mm Stroke, 2 Nos.
• Solenoid Operated DC Valves
- 4/2 Single Solenoid Valve
- 4/3 Double Solenoid Valve - 2 Nos.
• Proximity Switches
- Optical Type, PNP, 24 V DC - 2 Nos.
- Inductive Type, PNP, 24 V DC - 2 Nos.
• Electrical Limit Switch
• Power Supply: SMPS, 24 V DC, 5 A
• PLC Controller: 8 DI, 6 DO, 24 V DC, Make – Allen Bradley / Siemens or equivalent
• Hose Pipes: High-Pressure Hoses with Quick Release Couplings – 8 Nos.
• Workstation: Made in M.S. Square Tubes & CR Sheets, Powder Coated