• Civil Engineering Lab Equipments, Mechanical TVET Workshop Lab Equipments
  • Enquiry
  • Login
  • Sign Up
Browse

Water Bath Equipments

Laboratory Supplies - Water Bath Equipments, Civil Engineering Lab Equipments manufacturers in India, civil engineering laboratory equipments suppliers

Double Walled Water Bath Laboratory Equipments Supplies

Double Walled Water Bath Double Walled, inside stainless steel and outside mild steel sheet painted in epoxy powder coating.Gap of 25mm between the walls insulated with pure white glass wool. Top of the bath and concentric rings are stainless steel Thermostatic control temp. ranging from room temp. to 100°C with ± 0.5°C sensitivity. Without thermometer Power Supply-220/230 Volts A.C. 50 Hz. Sizes available a) 300x250x100mm 6 holes of 75 mm dia. 8 ltrs. b) 355x405x100mm 12 holes of 75 mm dia. 15ltrs. Optional Accessories Digital Temperature indicator cum-controllers Sizes available a) 300x250x100mm 6 holes of 75 mm dia. 8 ltrs. b) 355x405x100mm 12 holes of 75 mm dia. 15ltrs. Optional Accessories Digital Temperature indicator cum-controllers....

Product Code: NLE-Export-165001 - (Double Walled Water Bath Laboratory Equipments Supplies)

   

Serological Water Bath Laboratory Equipments Supplies

Serological Water Bath Double walled construction inner chamber is made of stainless steel & Outer chamber is made of mild steel with powder coating. The gap between the two walls filled with high grade glass wool insulation. Temp. controlled by thermostat. Temp. Range varies 5°C above ambient to 60°C.....

Product Code: NLE-Export-165002 - (Serological Water Bath Laboratory Equipments Supplies)

   

High Precision Water Bath Laboratory Equipments Supplies

High Precision Water Bath  Our  High Precision Water Bath is Double walled and Outer body made of mild steel painted with white stoving enamel chamber & lid made of thick stainless steel sheet. Temperature controlled by digital temperature controlled cum indicator from ambient to 95ºC, +/-0.2ºC or better. Glass window is fitted on the front side & stirrer arrangement with speed control regulator. Complete with pilot lamps, cord & plug. To work on 220/230V AC....

Product Code: NLE-Export-165003 - (High Precision Water Bath Laboratory Equipments Supplies)

   

Circulatory Water Bath Laboratory Equipments Supplies

Circulatory Water Bath The Circulating Water Bath should be used with the 2117-004 Multiphor II electrophoresis units and the CWP-2000 Programmable Power Supply.....

Product Code: NLE-Export-165004 - (Circulatory Water Bath Laboratory Equipments Supplies)

   

Refrigerated Water Bath Laboratory Equipments Supplies

Refrigerated Water Bath  With their PID microprocessor system and pump, temperature precision is optimized, as well as assisting in fast temperature changes when using the optional 9 step controller. The optional NüveTherm™ data control software enables remote control of the water bath and tracking of actual run conditions, ideal when traceability is important.T he top of the circulation pump housing incorporates a tray, convenient for exchanging samples or placing clips and other small items. An optional external circulation pump converts these water baths into thermostatic systems, heating or cooling, for other equipment. Features: Choice of 14 and 30 liter volumes Wide temperature range 0-80 °C Powerful internal circulation pump for homogeneous temperatures Optional 9 step (time/temperature) control system with 9 memories for fast recall Optional external circulation system Optional 9 step (time/temperature) control system with 9 memories for fast recall....

Product Code: NLE-Export-165005 - (Refrigerated Water Bath Laboratory Equipments Supplies)

   

Paraffin Bath Laboratory Equipments Supplies

Paraffin Bath  The Paraffin Section Mounting Bath is designed to assist with the handling of paraffin wax samples in histology and pathology laboratories. It is essentially a hot distilled water floating out bath that allows for the meticulous manipulation and location of paraffin wax sections onto glass slides. In the event of having any damaged sections or an excess of wax, both may be easily removed by skimming a filter paper across the water surface. A white neon light indicates "Power On" and an amber neon light indicates "Heater On". The required temperature is selected using the heater dial and a nominal temperature of 70°C is typically achieved with 2 litres of water within 120 minutes. Accurate water temperature is then maintained through an energy regulator which supplies power to a silicone rubber mat in controlled timed pulses. Over-heating of the bath is prevented by a thermal fuse within the heater mat which automatically cuts out at too high a temperature. The Paraffin Section Mounting Bath has a PTFE black interior and powder-coated aluminium exterior, which makes it virtually maintenance-free and extremely easy to clean. It comes supplied with an IEC moulded cord and lead set and the IEC socket houses protection fuses for both the live and neutral power supply lines. If required, the lid is supplied separately as part number AZ9241. Key Features • PTFE black interior and powder-coated white aluminium exterior • Virtually maintenance-free and extremely easy to clean • Excess or damaged sections may be simply removed by skimming a filter paper over the water surface • 70°C nominal temperature for 2 litres water, attained within 120 minutes Warranty: One year parts and labour Certification: CE Technical Specification Bath material Aluminium base with PTFE coated interior Temperature Ambient + 5°C to 75°C using arbitrary 1- 10 scale Dimensions (d x w x h), mm 330 x 330 x 140 Weight, kg 2.7....

Product Code: NLE-Export-165006 - (Paraffin Bath Laboratory Equipments Supplies)